





























Decided to give these a shot since my OEMs were falling off since the vehicle is so old. There are a few issues that came up while I was installing it on my 2001.
1. The rivet holes on the frame were too small for the provided rivets. I had to drill them wider to make them fit and to stop breaking the rivets.
2. One of the rivet holes (Pictured) is recessed, making it near impossible to properly seat the rivet. It's not too mad since the rest of the holes seem to hold the liner up pretty well.
3. I highly recommend drilling the optional driver side rivet holes, the flap is a bit loose around that area. The passenger side fairs a bit better, but if you do elect to drill them, you will need a small drill as the angle is very steep and awkward. I was unable to drill mine with a standard drill due to the angle of the wheel well.
4. There is a rivet hole that doesn't seem, to match any of the holes and currently just rests on my shocks. I'm not sure what the purpose of it is and is not really made clear. I could also be stupid.

